Amerimix Masonry and Portland Cements

Amerimix offers masonry, stucco and portland cement mixes for a variety of concrete and masonry construction applications.

Amerimix Masonry Cement is a specially formulated high strength field mix mortar using cement and plasticizers for producing mortar, for laying brick, concrete block or stone.
Amerimix Stucco Cement is suited for scratch, brown or finish coat applications. Amerimix Portland Cement meets the specifications for Type I & II cements and general use. It is a cost-effective material used in a variety of applications including cast-in-place, precast, tilt-up, drains, bridges, roads and concrete masonry units.

Environmentally Friendly Mortar and Stucco Cement

Amerimix greencore® 65=80 is an environmentally friendly mortar and stucco cement concentrate that can reduce the amount of material used by up to 20%. greencore® 65=80 offers a number of benefits over typical mortar and stucco cement.

A 65 lb. bag of greencore® 65=80 provides the same yield as a typical 80 lb. bag of masonry or stucco cement.
Amerimix greencore® 65=80 is designed for producing masonry mortars for a variety of interior or exterior applications.
Formulated for low air content, greencore® 65=80 helps eliminate air bubbles and voids.
High moisture retention improves finishing and curing, while reducing shrinkage and cracking.
When cured greencore® 65=80 mortar and stucco cement offers enhanced water resistance and high strength.

Locating Amerimix Products in Your Area

To contact a sales representative in your area, please visit our sales rep finder page. To locate Amerimix products in your area or to schedule silo and bulk bag delivery, contact Amerimix customer service at 1.888.313.0755.

GREENCORE 65=80 CEMENT PORTLAND LIME CEMENT TYPE I & II HIGH STRENGTH MASONRY CEMENT HIGH STRENGTH STUCCO CEMENT

greencore® 65=80 Masonry/Stucco Cement

Amerimix greencore 65=80 Masonry/Stucco Cement is an eco-friendly alternative to traditional masonry and stucco cements. Conveniently packaged in a 65 lb. bag, greencore 65=80 will yield the same amount of mixed product as 80 lbs. of traditional masonry or stucco cement, sand and water.

greencore 65=80 has all of the benefits of masonry cement while maintaining the workability of stucco cement. It repels moisture better than conventional mortar/stucco cement but retains more moisture during curing to prevent shrinkage and cracking. Simply add sand and water.

Gray in color.

PDF DOWNLOADS

greencore® 65=80 Masonry/Stucco Cement

DATASHEET

MSDS

Available in 65 lb. bags.

Features & Benefits:

Masonry/stucco cement concentrate with the bond strength of mortar and the workability of stucco
Environmentally friendly; uses nearly 20% less material than conventional alternatives yielding the same amount of mortar as a typical 80 lb. bag of masonry or stucco cement
Formulated for lower air content to help eliminate voids and bubbles
High moisture retention offers improved curing and better finishing

Specifications:

ASTM C91 Standard Specification for Masonry Cement
ASTM C1329 Standard Specification for Mortar Cement
ASTM C270 Standard Specification for Mortar for Unit Masonry
ASTM C1328 Standard Specification for Plastic (Stucco) Cement
ASTM C926 Standard Specification for Application of Portland Cement Based Plaster

Uses:

Anywhere masonry cement and/or stucco cement is used
Laying block, brick, tile and stone
For scratch, brown and finish coat work
Applications requiring higher compressive strengths
Where lower air content, better water repellency are required
Where a high yield, low weight product is needed

Portland Lime Cement Type I & II

Amerimix Type I/II Portland Cement is a cost-effective building product used widely in concrete and masonry construction. It is used as a basic constituent in many applications.

Amerimix Type I/II Portland Cement possesses the strength and versatility of Type I with the added protection of moderate sulfate resistance and lower heat of hydration found in Type II Portland.

PDF DOWNLOADS

Portland Lime Cement Type I & II

DATASHEET

MSDS

Available in 94 lb. bags.

Features & Benefits:

Comprised of quality raw materials
Manufactured under exacting conditions
Able to achieve high compressive strengths

Specifications:

ASTM C150 Standard Specification for Portland Cement for Types I & II
ASTM C1157 Standard Specification for Hydraulic Cement for Type GU Cement

Uses:

Used in a wide array of applications from walkways, floors, footings, masonry, patios, post setting, culverts, bridges, pilings, water tanks, abutments, reinforced concrete/masonry. Used to make concrete where 2-inch thickness or more is needed.

High Strength Masonry Cement

Amerimix High Strength Masonry Cement is ideal for producing masonry mortar used in brick, block, tile or stone setting applications. Manufactured under controlled conditions.

Amerimix High Strength Masonry Cement uses premium raw materials rendering a finished product that exceeds ASTM C91 and ASTM C270.

PDF DOWNLOADS

High Strength Masonry Cement

DATASHEET

MSDS

Available in 80 lb. bags.

Features & Benefits:

High bond strength
Achieves Type S or M compressive strength
Excellent water repellent characteristics
Consistent, dependable product

Specifications:

ASTM C91 Standard Specification for Masonry Cement
ASTM C1329 Standard Specification for Mortar Cement
ASTM C270 for Type S and Type M mortar when mixed with sand conforming to ASTM C144

Uses:

For making Type S or M mortars
Laying brick, concrete block or stone in the construction of stem walls, chimneys, partition walls, retaining walls, brick/stone veneers

High Strength Stucco Cement

Amerimix High Strength Stucco Cement is manufactured with Portland cement, plasticizers, workability agents and air-entraining additives.

Ingredients are proportioned, combined, and packaged under strictly-controlled conditions to ensure uniformity and excellent performance.

Gray in color.

PDF DOWNLOADS

High Strength Stucco Cement

DATASHEET

Available in 80 lb. bags.

Features & Benefits:

High bond strength
High compressive strength
Can be used to create a variety of architectural finishes

Specifications:

ASTM C91 Standard Specifications for Masonry Cement

Uses:

In scratch, brown and finish coat applications
Over masonry or lath
In a variety of textured finishes
In new construction or renovation
In exterior or interior stucco applications